Airy R601X DSM2 / DSMX Compatible Satellite Receiver

生產商: Airy
Compatible with DSM2 / DSMX transmitters, just connect it to a flight controller that support those protocol and bind it with your transmitter, it's that simple. * Note This is...

有現貨

HK$120.00
Compatible with DSM2 / DSMX transmitters, just connect it to a flight controller that support those protocol and bind it with your transmitter, it's that simple.

* Note
  • This is not a Spektrum DSMX product, nor is it a copy of a Spektrum DSMX product. The Spektrum and DSMX brand is a trademark of Horizon Hobbies USA.
  • This is not an underground black market fake Spektrum product.

Specs
  • Frequency : 2.4Ghz DSMX / DSM2
  • Size : 23x15x5mm
  • Wire Length : 170mm
  • Antennae Length : 26mm
  • Voltage Range : 3.3V
  • Weight : 0.9g
  • Range : 500M (tested with JR DSX9)
Cables
  • Orange : 3.3V
  • Black : GND
  • Grey : Signal




How to bind?
  1. Remove ALL propellers on your drone first, this is for safety reason
  2. Connect receiver to the flight controller's DSM2 / DSMX port with 3.3V power output
  3. Press and hold the bind button on the RX and power up the Flight Controller, it will be flashing orange LED rapidly, that means it has entered Bind mode
  4. Press and hold the bind button on your RC TX and turn it on, it will start looking for a RX and recognize the R601X as DSMX 22ms device, the orange LED on the receiver should goes off
  5. Cycle the power on the Flight Controller and RC TX, the receiver should have solid orange LED, that means it has successfully bound with the RC TX
  6. Sometimes the receiver has old code and needs to erase first, repeat the binding process if that's the case

Setup in BetaFlight / CleanFlight configurator
  1. In "Ports" page, turn on Serial RX tab for UART2 or UART3 (depends on what Flight Controller), then press Save and Reboot
  2. In "Configuration" page, "Receiver Mode" section, please choose "RX_SERIAL", and in the "Serial Receiver Provider" second, please choose SPEKTRM2048 for DSMX transmitter or SPEKTRM1024 for DSM2, then press Save and Reboot
  3. In "Receiver" page, make the "Channel Map" to TAER1234, then press Save
Product Status : In-Stock

Best Sellers