BeeRotor BRF3 Flight Controller w/ OSD Module 2-in-1

生產商: BeeRotor
The BeeRotor BRF3 Flight Controller is a variation of the famous SP Racing Flight Controller, it features all the good function but it has the cable re-arranged, even more it...

有現貨

HK$350.00
The BeeRotor BRF3 Flight Controller is a variation of the famous SP Racing Flight Controller, it features all the good function but it has the cable re-arranged, even more it has an OSD module built in so that save you some work for soldering.

This BRF3 flight controller runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users. Being open-source means that you too can contribute to the system. It is great for FPV racing, acrobatic flying or aerial photography, supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.

Cleanflight comes with a detailed manual that is reviewed and maintained by the Cleanflight developers and community. No more out-of-date wiki pages and second-hand information.

Features
  • On board OSD with absolutely original MAX7456EUI+ and standard FTDI debug port
  • Multifunction OSD connectors with video_IN/ video_OUT/ICSP/debug port (UART1)
  • Optimization for Cleanflight/Betaflight firmware
  • ARM Cortex-M4 core STM32F303CC with 32bit/72MHz/256K Flash/40K SRAM and hardware floating point unit
  • MPU6050 and BMP180 / BMP280 Sensors
  • Build-in 8MB flash for black box log recorder
  • Receiver connector with PPM/SBUS/SumD/DSM2/DSMX and RSSI input
  • Up to 3 serial ports and 8 PWM outputs
  • Multifunction connectors with SWD/UART2~3/Soft-serial/Buzzer/LED trip/Voltage detection
  • PDB connector with 5V input/Current and Voltage detection
  • Power input reverse polarity protection

Specifications
  • Target : SP Racing F3
  • Power input: 5.0~5.5V
  • Dimension: 35x35x9mm
  • Fixing hole spacing: 30mm
  • Weight: 7.3g
  • PPM/RSSI/SBUS/SumD Receiver Cable
  • Camera/video-TX cable
  • Buzzer/LED strip/voltage detect cable
  • OSD debug port to FTDI adapter cable

Easy I/O Ports



Works great with BeeRotor power distribution board


Flight Performance
  • Builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.
Build in OSD Module
  • With Video Input and Output port, works MWOSD firmware, connects to computer for configuration
No-Compromise I/O
  • Use all the features all the time; e.g. Connect your SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
Configurable
  • Runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
Tiny and lightweight
  • Standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 7 grams.
Flight Logging
  • On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.
Next-Generation CPU
  • ARM Cortex-M4 72Mhz CPU with Math co-processor (FPU) for efficient flight calculations that gets more done in less time.
  • Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
Developer Friendly
  • Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
OneShot ESC
  • Full support for OneShot ESCs for easy PID tuning and a sharper response.
Broad RC receiver Support
  • Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
Programmable LED
  • Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Battery Monitoring
  • Battery monitoring ports for voltage and current.
Sonar
  • Sonar support for precision low-altitude hold.
I2C Port
  • I2C port always powered, perfect for external sensors or always-on OLED Screen.
Buzzer
  • Buzzer port for audible warnings and notifications

Includes




Product Status : In-Stock

Useful Information :

Best Sellers