FlexRC Owl FPV Quadcopter frame for Indoor and Outdoor 3" Prop

生產商: FlexRC
Introduction Owl is a 118mm brushless FPV quadcopter frame with integrated 3 inch propeller protection, designed to be safe proximity indoor and park flier with support of wide variety of...

有現貨

HK$580.00
Introduction
Owl is a 118mm brushless FPV quadcopter frame with integrated 3 inch propeller protection, designed to be safe proximity indoor and park flier with support of wide variety of equipment and great mounting options.

Features
  • Integrated propeller and equipment protection
  • Ability to mount motors facing up or down
  • Ability to use wide variety of motors like 1105, 1306, 1407
  • Ability to use virtually any VTX and to mount it on top or bottom plate
  • Ability to mount battery on top or bottom
  • Many mounting holes which help to keep all wires together for the clean and beautiful build
  • Mounting holes for popular flight controllers like Naze32, SP Racing F3, CC3D and other boards that use 30.5mm distance between holes
  • Ability to fly with GoPro on 3S batteries with high discharge rating (slow flier) and 4S batteries








What it looks like when assembled


Different size of the Owl series


Design considerations
Owl Frame consists of two plates with the same pattern of mounting holes to allow flexibility of the choice of where you want to mount your equipment. It allows you to mount motors facing up or facing down, to mount VTX on the top or bottom plate, it really depends on your imagination and allows you to create uniquely looking quadcopter.

Owl Frame has many mounting holes which allow you to tie all the wires together, so they won’t stand in the way of propeller and make your build look clean and beautiful.

Owl Frame uses optimal amount of material to be as light, as small and as strong as possible.

Why do you need it?
  • Easiest way to learn FPV without worrying too much
  • To be sure that you won’t hurt anybody with propellers, as they can cause pretty serious injuries
  • To be able to fly inside of the house without damaging furniture
  • To protect quadcopter equipment and save money on propellers, because everything is deep inside of the cage
  • It is designed around popular 3 inch propellers format, which lets you use wide variety of equipment and helps to save you money
Why Owl has been created?
As many of you, I’ve started from 250mm quadcopters, just because it was the smallest quadcopter you were able to get at some point. I quickly realized that it is not what I needed, because it was not really small, it was scary dangerous for surrounding. Well, forgive me, but I can’t drive outside of the town too often to fly this strong and scary machine and in the area where I live, kids are playing everywhere. At home, with my level of flying skills, you will either break everything around or cut somebody’s head off. So I’ve got prop protectors for it, but whoever designed them didn’t realize that you will need to protect propeller from top and bottom, because otherwise it won’t really have the effect you need. So, my experiment has failed and this quadcopter was mostly collecting dust on the shelf."

Then I came across 1104 motors and Atom and immediately thought that this is what I need! To my quick disappointment I was buying hundreds of propellers every month, which is not environment and wallet friendly, and frankly annoying.

Then I came across RS90 and loved it (still love) so much, I thought that this is probably what I was looking for. But unfortunately it missed some of the qualities which my Atom had as for example you can’t fly with GoPro camera, it has relatively weak throttle response on 2S batteries (it is way better on 3S batteries) in comparison to what I’ve got used to, inability to use cheap and good motors on it. But then 3S battery wears out these DP03 motors very quickly and they are really fragile in general.

It made me think that it would be great to have something like this but for more common, as of now, 3 inch propellers standard. I’ve asked around and nobody was offering any solution at this time.

I’ve figured that I’ll have to design something by myself It took me some time to refresh my AutoCAD skills.

While I was figuring it all out, new frame with the name “Butters” appeared and I thought oh, great, now I can just buy and use it instead, but then, after I saw if for the first time, I quickly realized that it won’t work for me as it didn’t provide enough of mounting flexibility for quadcopter equipment and looked super heavy.

Well… I guessed, that I would actually have to try make something myself then. After all, this hobby is about research and development. Isn’t it? =)

Specifications

  • 2mm 3K carbon fiber motors holding plate
  • 2mm 3K carbon fiber top plate
  • 118mm motor to motor distance
  • Weight of two plates: 55g
  • Approximately 192g AUW (built using 1105 motors) with 610mah 3S battery
Recommendations
  • Storm M1306 3100kv motors installed on the bottom plate facing up
  • Raptor 20A ESCs
  • Genuine RotorX RX3040T props
  • Flight controller of your choice
  • 450mah to 610mah 3S battery with 65C discharge rating or 4S battery in order to fly with GoPro

This package includes :
1. 1 X FlexRC Owl Carbon Fiber airframe (Upper and Lower deck)
2. 30mm Nylon columns
3. M3 screws


Product Status : In-Stock

Best Sellers