FrSky XMPF3E F3 Flight Controller + S.Bus Receiver 2-in-1

生產商: FrSky
It's a F3 Flight controller and XM+ receiver 2-in-1! Another new product is coming! XMPF3E, the first flight controller of FrSky and integrates XM+! Features the latest Accelerometer, Gyro and...

有現貨

HK$300.00
It's a F3 Flight controller and XM+ receiver 2-in-1!
Another new product is coming! XMPF3E, the first flight controller of FrSky and integrates XM+!

Features the latest Accelerometer, Gyro and Compass and Baro sensor technology. XM+ receiver is a one-way receiver (no telemetry), it will receive the commands of Remote Control and send to F3EVO by SBUS (8CH is RSSI) to UART2 Rx of F3EVO 6 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.

Features :
  • Built-in F3EVO and XM+ receiver module
  • Features the latest Accelerometer, Gyro and Compass and Baro sensor technology.
  • XM+ receiver is a one-way receiver (no telemetry), it will receive the commands of Remote Control and send to
  • F3EVO by SBUS (8CH is RSSI) to UART2 Rx of F3EVO
  • 6 PWM output signal lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.





Configuration on the F3EVO
Because the XM+ receiver receive the commands of Remote Control and send to F3EVO by SBUS(16CH, 8CH is RSSI) to UART2 Rx of F3EVO, we need set the appropriate settings on the Configurator tool.
  1. In the ports, set the UART2 to be Serial RX.
  2. In the Configuration, set the Receiver Mode to be RX_SERIAL and Serial Receiver Provider to be SBUS, and disable the RSSI_ADC Analog RSSI input.
  3. In the Receiver, set the RSSI Channel to be 8. For other configurations, please refer to the Cleanflight/Betaflight.

Specifications :
  • Target : SP Racing F3 EVO
  • Model name : XMPF3E
  • Dimension : 36×36×6mm (L × W × H) with 30.5mm mounting holes
  • Hardware : STM32F303 CPU (72Mhz inc FPU), MPU9250
  • (accelerometer/gyro/compass), and BMP280 barometer for F3EVO, CC2510 CPU for XM+ receiver
  • Weight : 7g
  • Channels : 16CH (8CH is RSSI) by SBUS to UART2 Rx of F3EVO
  • Operating Voltage Range : 4.0~10V
  • Operating Current : 100mA@5V
  • Compatibility : FrSky Taranis X9D/X9E/ Horus X12S/XJT in D16 mode
  • Firmware Upgradeable


Software :
The F3EVO runs the open-source Cleanflight/Betaflight flight control (FC) software and firmware upgradeable (SPRACINGF3EVO), the factory firmware is betaflight_3.0.0_SPRACINGF3EVO. The XM+ receiver runs the software which was developed by FrSky and firmware upgradeable.

Suitable for : FrSky D-series Module (D16)

Product Status : In-Stock

Useful Information :

Best Sellers