Lumenier QAV-X Storm Edition (Storm Racing Drone)
Lumenier QAV-X Charpu 競速無人機使用X型機架設計, 不論Freestyle 及 Racing 同樣有優越表現。QAV-X 使用4mm主板在高度輕量化的同時，保持有足夠的剛性。獨特的FPV鏡頭空間設計，自然傾斜35度，方便使用各類GoPro/小米 攝錄機，在高速環境下拍攝最佳角度。
QAV-X Storm Edition 精心調教
在Storm團隊的精心調教下，不論新手或高手都能即時享受樂趣！每樣配件都是精心挑選，一切都是為了高度輕量化設計。使用SP Racing F3 預betaflight 軟件，配合Storm Spear 2205 2350kv 輕量化馬達，Aikon 30A 高速電調，動力澎拜！更裝有Runcam Swift FPV 鏡頭，FX799 Race band圖傳，TBS 天線等等豪華配置。絕對是終極組合！
QAV-X Storm Edition has FREE UPGRADE with Storm Raptor 390 30A ESC.
A light weight, super stiff, finely tuned airframe that is designed for high performance FPV Drone Racing
Lumenier QAV-X Storm Edition Ready-to-Fly Package
The Lumenier QAV-X CHARPU FPV racing quadcopter is a symmetrical X, light weight, super stiff, finely tuned airframe designed for high performance FPV Drone Racing. The QAV-X was created in collaboration with and named after the World-Famous Lumenier team pilot, CHARPU. This racing airframe is stripped down to the bare essentials without sacrificing strength and durability.
The QAV-X features a unique FPV camera and HD mounting system. The FPV camera is recessed partially below top plate and protected by the top cross bar, guarding your electronics. At the same time, the camera side walls act as an angled wedge to set your HD camera on for recording, such as a GoPro, at a 35 degree angle. No need to 3D print custom mounts to angle up your camera anymore, just add some of the included neoprene foam, securely strap down your camera and fly!
The main "unibody" plate is CNC milled out of a solid sheet of premium Lumenier carbon fiber. The outer weave of the carbon fiber runs 100% down each arm of the QAV-X (0/90 weave), maximizing the strength of the carbon and arms. The center layers are offset at 45 degrees providing even and balanced strength throughout the entire plate.
The top plate includes an accessory antenna extension plate, allowing for multiple cable ties to lock down your antenna in place. No more damaging the SMA connection on your VTX. The top plate also has a cutout allowing access to your VTX button and LED displays for easy channel adjustment. The balancing bumps on the sides of the top plate make it easy to measure the center of gravity on your frame in the field to get the perfect balance.
Each kit includes a carbon fiber battery protector plate. The airframe is designed to strap a LiPo battery to the bottom, leaving the battery exposed during a hard landing or crash. Use this included plate to wrap underneath the battery, sandwiching the pack between the main plate and protector plate. Additionally, you can use the included Neoprene foam to create a landing pad on the bottom of the battery protector plate. This will help keep the airframe upright during take off and landings.
The airframe comes with high quality aluminum hardware. All screws are premium, black oxide steel. The spacers have a textured grip surface treatment, which facilitates holding of the spacers during assembly and servicing of the airframe. The spacers are also 28mm tall vs the standard 35mm. This gives the airframe a sleek, low profile look.
Lumenier QAV-X CHARPU FPV Airframe flown by CHARPU himself!
Lumenier QAV-X 5" (215mm) airframe Features
- Full 3K Carbon Fiber airframe featuring a solid 4mm main plate.
- Dual purpose FPV and HD camera mounting solution.
- Compact size for 5" propellers, 214mm motor to motor.
- Black Oxide steel screws
- Easy grip black anodized spacers
- Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
- "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
- Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).
- LiPo battery protection plate included.
- Designed around popular 26mm sized cams in cases such as the Runcam Swift 600TVL CCD Camera or other HS1177 standard camera.
- Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
- Lightweight and rigid
This is a Storm Edition - which means it's built and tested by FPV racing experts.
The Lumenier QAV-X Storm Edition utilize the powerful Storm Spear™ M2205 2350kv motor, Storm Raptor 390 30A ESC and HQ 5 x 4 x 3 Tri-Blade propellers running on 4S battery, sit tight and experience the shockingly high speed from the monstrous power system. HGLRC 3-in-1 SP Racing F3 Flight controller to keep the weight down and clean wiring, RunCam Swift 90° 600TVL CCD camera combined with the Storm FX799T 200mw video transmitter w/ Raceband and TBS Triumph antenna provides the best possible piloting experience.
QAV-X - The choice of the World’s best FPV pilots.
We build it for you!
We have years of experience in this field and learned a lot of know-how on how to build a good FPV racer, we care about details and expect nothing less from our RTF or BNF aircraft, we also provide different spec built for different experience, each drone is built and tested by Storm factory guys to ensure you'll get a truly world class, out-of-box ready to fly FPV racer. Preloaded with Storm tuned 3 Flight modes, everyone can enjoy, from beginners to experts.
The Lumenier QAV-X Storm Edition includes our exclusive optimized BetaFlight Parameters!
Pre-loaded with three flight modes and three speeds.
The Angle Mode is auto-leveled making is a no-stress flying experience for the complete beginner or for flight training.
In Horizon Mode the drone is no longer limited by angle, allowing you to do flip and roll, auto-leveling directly after performing the trick.
In Rate Mode, the drone will fly like an airplane with no auto-leveling or angle limitation, making it great for flying around in large spaces.
These flight modes are completely unique to the QAV-X – there is nothing else like it on the market.
Ultra light weight Storm Spear M2205-2350kv and HQ 5 x 4 x 3 tri-blade propeller
Specially built for the latest FPV racing generation, by using high quality steel bearings and CNC precision machined parts, the Storm Spear™ motor delivers silky smooth and reliable power. The Kv and size of the motor are carefully selected to be optimized for 5" props on a 4s battery which gives you excellent handling and rocket fast speed.
Storm Raptor 390 30A ESC, utilizing BLHeli firmware compatible with OneShot (default), MultiShot and Active Braking (aka. Damped Light)
Continuous 30A and Burst at 40A output, works great with 220X motors.
Comes complete with the RunCam Swift CCD camera
The RunCam Swift CCD camera is well protected within the main frame, it ensures great image quality during transitions from bright to dark spaces. The tilt angle is fully adjustable, so that you can be assured of great video from any of the flight styles you choose.
Storm FX799T 200mw Video Transmitter with the famous TBS Triumph Antenna, delivers great quality and reliable video feeds
Built-in OSD (MWOSD software) tells you the critical flight data
It is a Storm Edition, which means that's always some nice touch!
A 1.5mm carbon fiber battery protector plate is included
Support to carry HD camera (e.g. GoPro 4, Mobius, Runcam etc.) at 35 degree angle
Installed with a remote controlled battery-warning buzzer!
A remote controlled battery-warning buzzer comes already installed in the drone. This buzzer will alert you when the low voltage threshold (adjustable) has been reached. You can also trigger the buzzer using a switch on the transmitter to help locate the aircraft if you happen to land in tall grass.
A big reason for upgrading FrSky radio set (* optional)
You'll get telemetry data on the FrSky transmitter screen such as Battery voltage, Radio signal... etc, and it'll voice alert you for low battery and radio signal.
Lumenier QAV-X (215mm) Storm Edition Specifications :
- Weight : 304g (no battery)
- All-up-weight : 460g (w/ 14.8V 1300mah 65C battery)
- Dimension : 180mm (L) x 180mm (W) x 55mm (H)
- Flight Controller : HGLRC 3-in-1 SP Racing F3 (running BetaFlight software w/ Storm tuned parameters)
- Motor : Storm Spear™ 2205kv 2350KV Motor
- Propeller : HQ 5 x 4 x 3 tri-blade propeller
- FPV system : Storm 5.8Ghz FX799T 200mw Video Transmitter (Default 5665 mhz)
- FPV Antenna : TBS Triumph Antenna
- Camera : RunCam Swift 90° 600TVL CCD (PAL)
- Radio System : RadioLink AT9S 2.4Ghz
This package includes :
1. Fully Assembled Lumenier QAV-X (215mm) Storm Edition
2. RadioLink AT9S Radio System
3. 6pcs Clockwise HQ 5 x 4 x 3 tri-blade Propeller (4 of them are spare)
4. 6pcs Counter-Clockwise HQ 5 x 4 x 3R tri-blade Pusher Propeller (4 of them are spare)
5. 2.0mm Hex Wrench
6. 8mm Hex Nut Driver
7. Storm lipo strap
8. GoPro Mount and strap
* Battery sold separately
* Charger sold separately
Product Status : In-Stock
Useful Information :