Matek Power Distribution Board (4 to 6 Props / 5V and 12V UBEC / Type S)

This is a power distribution board (PDB) with both 5V and 12V UBEC on-board and a soldered on XT60 connector, very good for X-Shape FPV racers or normal H-Shape FPV racers.

Mount the board like this photo, connect the XT60 connector on one side.


Two ways to mount this board, depends on your drone's frame


Specifications :
- Weight : 11g
- Input : 9V~18V
- 5V UBEC : continuous 5V @ 2A (Max 2.5A 5s/minute), output ripple 40mV (VIn 16V, VOut 12V@2A Load)
- 12V UBEC : continuous 12V @ 2A (Max 2.5A 5s/minute), output ripple 20mV (VIn 16V, VOut 12V@2A Load)
- Dimension : 36mm X 50mm x 4mm (without XT60 connector)
- Mounting : Standard 30.5mm x 30.5mm


Suitable for :Four to Six Rotor Drone

Product Status : In-Stock

Useful Information :