Polar Pro Filter Set for P3 / P4 (6 Filters)
The PolarPro DJI Phantom 3 / Phantom 4 Filter Pack includes the necessary filters to maximize the quality of your aerial imagery. The new ultra-light, high definition glass allows you...
The PolarPro DJI Phantom 3 / Phantom 4 Filter Pack includes the necessary filters to maximize the quality of your aerial imagery. The new ultra-light, high definition glass allows you to capture razor sharp imagery, and is light enough to smoothly operate your gimbal. Each filter weighs a mere 4.64g (CP) and 4.06g (ND's) The stock UV filter weighs 3 grams, therefore these filters only add only 1.64 and 1.06 grams to the gimbal when you remove the stock UV filter. Each filter is constructed out of light-weight aluminum and threads onto the DJI Phantom camera for easy installation/removal (NOTE: you must unscrew the stock UV filter on the Phantom camera to install our filters). If you are trying to capture high quality Phantom video, this filter pack is for you.
Product Status : In-Stock
- Limited Edition 6-Pack
- Includes CP, ND8, ND16, ND32, ND8/PL, ND16/PL
- Includes Limited PolarPro 6 filter carrying case (PolarPro Site Only)
- Precise aluminum threaded design replaces stock UV filter
- New lightweight design adds as little as 1.2 grams to the gimbal
Circular Polarizer Filter (CP) (4.64g)
The circular polarizer filter helps enhance aerial videos by reducing the amount of light reflecting off of the ground, leaving behind beautifully saturated colors and also improving contrast. This CP filter reduces the camera's shutter speed by 1.4 f stops. Our target shutter speed is 1/100-1/150th so normally we use ths CP during the early morning hours or dusk when we don't have to knock down the shutter speed too much.
3-Stop Neutral Density Filter (ND8) (4.06g)
The 3-stop ND filters are typically what we use in medium light. This filter also helps reduce jello-effect by reducing the cameras shutter. This is our go-to filter for partly cloudy days.
4-Stop Neutral Density Filter (ND16) (3.85g)
The 4-stop ND filter is what we use on brighter days, where we need to knock the shutter down by 4 stops to achieve a shutter of 1/100-1/150th. This filter will curb nearly all jello caused by the high vibrations of the Inspire 1 motors.
5-Stop Neutral Density Filter (ND32) (3.47g)
The 5-Stop ND filter is what we use on extremely bright days. This filter is designed to take down the Inspire 1's shutter speed by 5 stops. This is a very dark filter so it should only be used where there is enough available light to reduce. We use this shooting in the desert or over snow on very bright days.
3 Stop Polarizer (ND8/PL) (4.54g)
The ND8/PL is a versatile filter, which reduces the cameras shutter speed by 3 stops while also providing polarization. Perfect for conditions that are too bright for the CP filter, the ND8/PL allows you to reduce the shutter speed 3 stops while also capturing beautifully saturated colors.
4 Stop Polarizer (ND16/PL) (5.36g)
The ND16/PL provides 4 stops of shutter speed reduction while also providing polarization. This is our go-to filter for sunny days where we want to capture saturated colors and improve saturation.
Product Status : In-Stock