RadioLink AT9 9-Channel Radio System w/ S.Bus

生產商: RadioLink
Very Fast (3ms!!) and Reliable 9-Channel RC System by RadioLink It supports S.Bus and Data Telemetry, what's not to like? We like this RadioLink AT9 system so much, it has...

有現貨

HK$780.00
Very Fast (3ms!!) and Reliable 9-Channel RC System by RadioLink
It supports S.Bus and Data Telemetry, what's not to like?

We like this RadioLink AT9 system so much, it has 9-Channels on the R9D receiver, compatible with S.Bus and Telemetry module, this is rarely seen at this price range, and best news is it's SUPER easy to use, the menu in the transmitter is straight forward, easy access and we have it setup with our multi-rotor in just few minutes, binding is easy too, just turn on the transmitter, press on hold on the receiver and there, they've bound, it's really that simple.

The AT9 transmitter itself has a lot of switches and knobs on the top, they can be assigned to control the desired channel, three three-way switch and five two-way switch, and best of all, there is a Multi-Rotor mode on the transmitter, choose it and the screen menu interface will change, all the options are made for multi-rotors, this makes things easier. Bottom line is that this radio system is a GREAT deal, it works good, finishing is good, stick spring tension feels right, easy to use and reliable to use, included a 9-Channel receiver with S.Bus and Telemetry port.... you just can't beat this, not at this price range, you should really consider the RadioLink AT9 if you're building your aircraft.






RadioLink AT9 Transmitter Spec and Features:
  • Dimension : 183mm x 193mm x 100mm
  • Weight : 880g
  • Frequency : 2.4Ghz ISM (2400mhz ~ 2485mhz)
  • Modulation mode : QPSK
  • Channel bandwidth : 5.0mhz
  • Spread Spectrum : DSSS
  • Adjacent channel rejection : >38dbm
  • Transmitter power : <100mW (PCB testing), < 20dbm (3 meter air testing)
  • Operating current : <105mA
  • Operating voltage : 7.4V ~ 15V
  • Control range : 0.9km on Land, 1.5km on Air
  • Channels: 9-Ch / 5-9 Ch is customizable
  • Simulator mode : under simulator mode, the RC output is switched off
  • Screen : 2.8 inches 16 color screen, 240 x 320px
  • Switches : 3 x 3-way switch, 5 x 2 way switch (1 is the reset switch)
  • Compatible mode : All 120 and 90 degrees swashplate helicopter / All Fixed-wing and Glider / Five Flying Model / Multi-Rotors





RadioLink R9D Receiver Spec and Features:
  • 2.4Ghz DSSS Protocol - No interference with others
  • RX voltage and signal strength telemetry, external sensor for EP, Temperature, RPM, GPS etc.
  • S.BUS compatible
  • All 9 channels only take 3ms to response in parallel
  • 4096 resolution, stable servo and no rudder shaking issue
  • Takes high voltage up to 10V
  • Small design for convenient assembling and operating
  • Channel : 9-Ch / CH9 is for S.BUS
  • Max input voltage: 10V
  • Current : 38-45 mA(Voltage input: 5V)
  • Size: 43mm x 24mm x 15mm
  • Weight : 11g
  • Section precision 4096




How to bind?
1. Please turn on your transmitter and select a memory slot
2. Power on the aircraft, then Press and Hold the very small black button on the side of the receiver, until the LED goes flashing, then release the button.
3. After a few seconds it will automatically bind with the transmitter, it's that simple.

How to swap between S.Bus and PWM mode?
1. Make sure the receiver already bound to transmitter.
2. Double tap the very small black button on the side of the receiver (within 1 sec.), then the LED light will change color, Blue is S.Bus, Red is PWM.

Package Comes with :
1 x RadioLink AT9 9ch 2.4GHz Transmitter 
1 x RadioLink R9D 9ch 2.4GHz S.Bus Receiver
1 x English Manual

Product Status : In-Stock

Useful Information :
 

Best Sellers