RadioLink R9DS-Lite S.Bus Receiver for BeeRotor BRF3 Flight Controller

生產商: RadioLink
You always want to keep it light on a racing drone, the stock RadioLink R9DS receiver is quite bulky so we removed all the unnecessary stuff and leaving only the...

有現貨

HK$150.00
You always want to keep it light on a racing drone, the stock RadioLink R9DS receiver is quite bulky so we removed all the unnecessary stuff and leaving only the circuit board and antenna, then soldered cable from the S.Bus port to the flight controller and here we have a much smaller and lighter receiver for your racing drone.

This will work perfectly with RadioLink AT9 and AT10 Transmitter, please bind it before first use.

How to bind?
1. Connect the receiver to BRF3 Flight controller's UART3 port like the photo, make sure you have UART3 port's Serial RX turned on in the CleanFlight configurator on the computer, receiver mode is RX_SERIAL, S.BUS.
2. Please turn on your transmitter and select a memory slot
3. Power on the aircraft, then Press and Hold the very small black button on the side of the receiver, until the LED goes flashing, then release the button.
4. After a few seconds it will automatically bind with the transmitter, it's that simple.





RadioLink R9DS-Lite Receiver Spec and Features :
  • Size: 35mm x 22mm x 8mm
  • Weight : 4.1g
  • Section precision 4096

Suitable for : RadioLink AT9 / AT10 Transmitter

Product Status : In-Stock

Best Sellers